Bischoff's Medical Supplies

Home
About
Contact us
Location

SEMI-ELECTRIC

1762. Patriot Semi-Electric

Introducing the new Patriot Semi-Electric Homecare Bed with a grid sleep surface!
Designed and engineered by the same team who develop the GF Long Term Care beds.
Sleep surface and motors are MADE IN THE USA!

  • The motor unit and bed design provide the ultimate in quiet, smooth operation.
  • Complete welded steel frame construction.
  • The head and foot sections can be raised or lowered simultaneously or independently with one hand control.
  • During a power failure the motor unit can lower both the head and foot section with just a single standard 9 volt battery.
  • Assembles easily with just five components.
  • Total bed weight assembled: 166 lb (bed and motor only).
  • Available with Fiberboard Decorative Walnut Bed-ends or
  • High-impact Plastic Bed-ends.
  • Maximum patient weight 350 lbs.
  • 450 lb evenly distributed total weight capacity including patient, mattress, rails, and accessories.
  • Bed Height: Min. 15″, Max. 24″ (at deck level).
  • Lift Range: Head – 60°, Knee – 30°.
  • Overall Bed Size: 87″ L x 36″ W.
  • No external pinch points!
  • Slots in frame to ensure proper rail placement.
  • Locking pins secure bed ends to sleep deck. Attached lanyards prevent loss while moving or storing.
  • Only homecare bed to offer a 4-inch extension kit that can extend either the head, foot, or both head and foot decking. Bed length will be 84″ with one kit, 88″ with 2 kits.
  • The only homecare bed to offer optional corner mattress retainers
  • Grid Deck offers the following advantages:
  • Much stronger frame.
  • Better mattress support.
  • No spring sag or bottoming out with heavier patients.
  • Easier to clean.
  • No connecting links or springs to lose.

1763. Medline Basic Homecare Semi-Electric Bed

  • Bariatric: No
  • Bed Style: Semi Electric
  • Deck Style: Split Spring
  • Includes Staff Control
  • Opening: No
  • Length Inches: 80 “
  • Max Height Inches: 20 “
  • Max Length Inches: 80 “
  • Max Width Inches: 36 “
  • Min Height Inches: 15 “
  • Min Length Inches: 80 “
  • Min Width Inches: 36 “
  • Product Use: Home Care
  • Weight Capacity Pounds: 450 lb
  • Latex Info: Not Made With Latex

1764. MedLite Homecare Semi-Electric

  • Bariatric: No
  • Bed Style: Semi Electric
  • Deck Style: Split Spring
  • Includes Staff Control Opening: No
  • Length Inches: 80 “
  • Max Height Inches: 22.5 “
  • Max Length Inches: 80 “
  • Max Width Inches: 36 “
  • Min Height Inches: 14.5 “
  • Min Length Inches: 80 “
  • Min Width Inches: 36 “
  • Product Use: Home Care
  • Weight Capacity Pounds: 450 lb
  • Latex Info: Not Made With Latex

1767. Competitor II Semi Electric Height Adjustable Bed

  • #15571 Hand Crank adjustable bed height features a NEW positive fit hexagonal crank connection making it easy to raise and lower bed height for patient comfort, ease of entry/egress and patient care accessibility
  • Large glow in the dark hand pendant has easy-to-use controls for adjusting head and foot deck sections to comfortable positions built in battery backup and power indicator light. NEW Lock out feature can be used to prevent accidental actuation of head or foot adjustment
  • In the event of a power failure, a 9 volt battery (not included) located in the hand pendant can lower the head and foot sections to a horizontal position. Two additional Batteries can be installed into the motor housing to increase adjustment speed and extend battery life. No crank needed
  • Slat Deck provides strength, no-sag mattress support, no links to connect, easy to clean
    Patient weight capacity is 350 lbs. Total weight capacity 450 lbs. evenly distributed. Includes occupant, mattress, side rails, trapeze, accessories, personal affects, etc.
  • Ultra light head and foot frame weigh only 41 lbs. each making one person transport and assembly easy

1768. Delta pro homecare bed

  • Drive is leading the way in Homecare beds by introducing the most innovative bed system to ever appear in the market. Introducing the next industry gamechanger by Drive, the new
  • Delta Pro Bed System. This unique bed is designed to fit your needs offering a universal frame capable of configuring up to 6 different bed designs. Looking for a semi-electric bed? Full electric? Low bed? You can have them all with 1 universal frame system – the Delta Pro Bed by Drive. Now you can have the ability to offer your patients what they need when they need and utilize inventory space as efficiently as possible.
  • Patent pending Universal Frame can configure with various component to create up to SIX unique bed configurations offering more homecare bed options without the need to store more beds!
  • Assists with inventory constraints by offering 1 homecare bed system that can transform to suit multiple needs using color coded component options
  • Product Safety & Performance Standards: Meets IEC 60601-2-52; 60601-1; 60601-1-2; 60601-1-11
  • Safe working load capacity of 450 lbs
  • Choose between semi-electric and full electric motor options to provide head, foot, and height adjustability of bed frame as needed (excludes 15003PN, manual crank homecare bed system)
  • Ultra lightweight head and foot frames easy to set up by 1 individual with no links to connect and no tools required
  • Square tube steel frame slat deck provides durable strength, no-sag mattress support, and is easy to clean
  • HD Polyethylene molded bed ends are attractive, labeled for proper assembly, and easy to clean and maintain
  • Bed End safety lock slides over hanger pins to prevent disengaging from bed ends
  • UL approved motor is self contained for reduced weight and noise and can be easily installed and removed with patient in bed (excludes 15003PN)
  • Reduce service calls with large glow in the dark hand pendant that is easy-to-use for adjusting head and foot deck sections; built in battery backup and LED indicators for power and lockout included (excludes 15003PN)
  • Power failure protection available on dual style motors via a 9-volt battery (not included) located in the hand pendant which can return the frame to a horizontal position. Manual cranks included for all styles (excludes 15003PN, no electrical components means independent of electrical power availability)
  • Frame includes mounted retractable full rail receiver brackets to eliminate cross braces ensuring proper placement and reducing equipment loss
  • Half (15561HRAIL) and full (15561FRAIL) rails are available, sold seperately, and meet FDA entrapment guidelines as well as ASTM standards

Drive semi electric single crank bed

  • Quiet, smooth operation, Head/Foot section adjusts electronically, Height adjusts manually
  • Easy-to-transport and set up, Bed ships in two cartons
  • Shaft stores under frame when unassembled
  • Channel frame construction provides superior strength and reduced weight
  • Reinforced frame resists twisting and bending.
  • Long Lasting Zinc-coated spring deck for Pt comfort
  • Heavy Duty bed ends with durable HD Polyethylene Molded Bed End covers are attractive, easy-to-maintain
  • Clip-on pendant mounts on bed rail, operate Head and Foot section simultaneously
  • Half rails and full rails available in packages (PKG) or sold separately
  • Satisfies applicable FDA entrapment guidelines
  • Extension kit available (model #15005EXTKIT-L) extends length from 80″ to 84″
  • Patient weight Capacity 350 lbs. (158kg). Total Weight Capacity 450 lbs. (204kg)
  • Motor is UL Approved, Bed is manufactured in ISO9001 & ISO13485 facility

Delta Ultra- Light 1000, Semi-Electric Bed

  • The Delta 1000 is truly universal because the bed frame can be used with Drive’s and most other manufacturers’ bed ends, old and new
  • The transition box mounted on the foot section is key to interchangeability
  • The transition box allows you to change the rotation of the high/low shaft
  • Headboard is taller than footboard to better fit home decor 
  • The wood grain panels are break and scratch resistant
  • Foot section weighs 50% less than conventional foot sections to make deliveries safe and easy
  • Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations 
  • Labels and color-coded springs assure accurate installation of side rails for patient safety 
  • Unique motor is completely self-contained to reduce weight and noise
  • The motor assembly can be installed and removed with patient in bed
  • Bed, side rails and mattress safety-tested by SGS, a nationally recognized testing facility
  • Satisfies all applicable FDA entrapment guidelines
  • The motor is UL approved
  • In the event of a power failure, a 9 volt battery, located in the motor, can lower the head and foot sections nine times
  • No crank needed
  • New and improved hand pendant has large, easy-to-use controls 
  • Bed ships in two cartons
  • Channel frame construction provides superior strength and reduced weight
  • Zinc-coated spring deck
  • Extension kit available (model #15030EXTKIT) extends length from 80″ to 84″
  • Patent Pending
  • Weight Capacity 450 lbs