Bischoff's Medical Supplies
SEMI-ELECTIC
1762. Patriot Semi-Electric
- Patriot Semi-Electric Homecare Bed with a grid sleep surface!
- Designed and engineered by the same team who develop the GF Long Term Care beds.
- Sleep surface and motors are MADE IN THE USA!
- The motor unit and bed design provide the ultimate in quiet, smooth operation.
- Complete welded steel frame construction.
- The head and foot sections can be raised or lowered simultaneously or independently with one hand control.
- During a power failure the motor unit can lower both the head and foot section with just a single standard 9 volt battery.
- Assembles easily with just five components.
- Total bed weight assembled: 166 lb (bed and motor only).
- Available with Fiberboard Decorative Walnut Bed-ends or
- High-impact Plastic Bed-ends.
- Maximum patient weight 350 lbs.
- 450 lb evenly distributed total weight capacity including patient, mattress, rails, and accessories.
- Bed Height: Min. 15″, Max. 24″ (at deck level).
- Lift Range: Head – 60°, Knee – 30°.
- Overall Bed Size: 87″ L x 36″ W.
- No external pinch points!
- Slots in frame to ensure proper rail placement.
- Locking pins secure bed ends to sleep deck. Attached lanyards prevent loss while moving or storing.
- Only homecare bed to offer a 4-inch extension kit that can extend either the head, foot, or both head and foot decking.
- Bed length will be 84″ with one kit, 88″ with 2 kits.
- The only homecare bed to offer optional corner mattress retainers .
- Grid Deck offers the following advantages:
- Much stronger frame.
- Better mattress support.
- No spring sag or bottoming out with heavier patients.
- Easier to clean.
- No connecting links or springs to lose.
1763. Patriot LX Semi-Electric
- Robust steel grid deck sleep surface provides superior mattress support and easy to clean surface compared to traditional spring decks
- Head and foot sections can be raised or lowered simultaneously or independently with one hand control
- Recessed main frame offers maximum pinch point protection between grid deck and frame – reducing the risk of injury
- Lightweight design weighs only 118 lbs – lightest bed on the market
- Bed setup is so simple that it can save on setup time and requires minimal maintenance keeping your technicians time efficient
- Patent pending integrated HI-LO mechanism makes bed height adjustment easy and reduces potential loss of parts such as HI/LO rod when used as rentals
- Self contained crank for semi-electric that can be used at either end makes adjustment from low 10″ to 20″ easy and even allows for trendelenburg and slant positioning
- Patent pending rail slots in frame ensure quick and proper rail placement
- Single motor unit is designed for easy installation, requires less maintenance and provides the ultimate in quiet, smooth operation
- Attractive, “home-like” thermo fused bed ends offer a less institutional look and eliminate a bed component that often requires frequent repair and maintenance
- Features SilverSolutions- an anti-microbial technology built into the paint that protects against bacteria and odor
- During a power failure, the motor can lower both the head and foot section with just a single 9 volt battery
- 4″ extension kit can be installed on head, foot or both to extend bed length to 84″ or 88″
- Grid Deck offers the following advantages:
- Much stronger frame
- Better mattress support
- No spring sag or bottoming out with heavier patients
- Easier to clean
- No connecting links or springs to lose
- Technical Specifications
- Total bed weight assembled: 118 lb
- Maximum patient weight: 350 lbs EVENLY DISTRIBUTED, 450 lb distributed total weight capacity including patient, mattress, rails and accessories
- Overall Bed Size: 84″ L x 35″ W
- Lift Range: Head – 60, Knee – 30
- Bed Height: Min. 10″, Max. 20″ (at deck level)
1764. Semi-Electric Bed (Single Crank)
- Quiet, smooth operation, Head/Foot section adjust electronically Height adjusts manually
- Easy to set up Bed ships in two cartons Shaft stores under frame when unassembled
- Channel frame construction provides superior strength and reduced weight
- Reinforced frame resists twisting and bending Zinc-coated spring deck for Pt comfort
- Heavy-duty bed ends; attractive, easy-to-maintain, interchangeable w/Invacare/Sunrise
- Clip-on pendant mounts on bed rail, operate Head and Foot section simultaneously
- Half rails and full rails available (Sold separately)
- Bed Height: 16″ – 24.5″
- Unit Dimensions: 36″ (W) x 88″ (L)
- Weight: 170 lbs.
1767. Delta Ultra- Light 1000, Semi-Electric Bed
- The Delta 1000 is truly universal because the bed frame can be used with Drive’s and most other manufacturers’ bed ends, old and new
- The transition box mounted on the foot section is key to interchangeability
- The transition box allows you to change the rotation of the high/low shaft
- Headboard is taller than footboard to better fit home decor
- The wood grain panels are break and scratch resistant
- Foot section weighs 50% less than conventional foot sections to make deliveries safe and easy
- Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations
- Labels and color-coded springs assure accurate installation of side rails for patient safety
- Unique motor is completely self-contained to reduce weight and noise
- The motor assembly can be installed and removed with patient in bed
- Bed, side rails and mattress safety-tested by SGS, a nationally recognized testing facility Satisfies all applicable FDA entrapment guidelines
- The motor is UL approved
- In the event of a power failure, a 9 volt battery, located in the motor, can lower the head and foot sections nine times No crank needed
- New and improved hand pendant has large, easy-to-use controls
- Bed ships in two cartons
- Channel frame construction provides superior strength and reduced weight
- Zinc-coated spring deck
- Extension kit available extends length from 80″ to 84″
- Patent Pending
- Weight Capacity 450 lbs
1768. Drive Ultra Light Plus, Hi/Lo Semi Electric Bed
- Large glow in the dark hand pendant has easy-to-use controls for adjusting head and foot deck sections to comfortable positions; built in battery backup and power indicator light
- In the event of a power failure, a 9 volt battery (not included) located in the hand pendant can lower the head and foot sections to a horizontal position No crank needed
- Hand Crank adjustable bed height is easy-to-raise and lower for comfort and accessibility
- 15570FR comes complete with full side rails and frame mounted retractable receiver bracket to eliminate cross braces, ensure proper placement and reduce loss
- Ultra-light head and foot frame weigh only 42 lbs each
- Slat Deck provides strength, no-sag mattress support, no links to connect, easy-to-clean
- Channel frame construction provides excellent strength and reduced weight
- Frame safety lock slides over hanger pins to prevent disengaging from bed ends
- Self-contained motor for reduced weight and noise (same as Delta Ultra-Light 1000)
- UL approved Motor can be installed and removed with patient in bed
- Molded Plastic Bed end panels are durable, lightweight and attractive to blend with décor
- Headboard is taller than footboard to better fit home décor; head and foot boards are interchangeable
- Casters are standard
- Weight Capacity 450 lbs evenly distributed Includes occupant, mattress, side rails, trapeze, accessories, personal affects, etc
- Optional trapeze available
- Bed Height w/3″ Casters: Low Height 14 3/4″ | Hi Height 22″
- Unit Dimensions: 35″ (W) x 84″ (L)
- Weight: 163 lbs. (74 kg)